Hot Wired Audio Video
Rather than using multiple satellite speakers and a subwoofer, the Omni89AT allows a single enclosure to do the same job of four 42AT All-Terrain satellite speakers and a subwoofer, delivering the same legendary James landscape performance in a more compact above ground unit.
|Sensitivity||89dB 2.83V /1m|
|Speaker Type||Outdoor Loudspeaker|
|Midrange Size||3” x 4|
|Woofer Composition||Aluminum Cone|
|Number of Speakers||1|
Call for Best Price
James Loudspeaker designs and manufactures innovative solutions to accommodate the best in outdoor audio experiences and provide superior outdoor home theaters. The Omni89AT loudspeaker by James makes a great addition to the AT Series (All-Terrain) by offering a full range omnidirectional alternative to the simple landscape speaker where complete 360° wide coverage and above ground installation are needed. Typical applications include rock scape areas where traditional sat/sub combinations cannot be installed, or large open seating where full omni coverage is a benefit.
Rather than using multiple satellite speakers and a subwoofer, the Omni89AT allows a single enclosure to do the same job of four 42AT All-Terrain satellite speakers and a subwoofer, delivering the same legendary James landscape performance in a more compact above ground unit. Complete with 15 standard finishes and unlimited custom formats to allow seamless integration into all outdoor environments, this compact all-inclusive loudspeaker makes a great addition to any James landscape system where locating multiple speakers is difficult.
Performance comes from four James 3” proprietary all-terrain coaxial aluminum woofers with 0.75” aluminum tweeters, and a down firing aluminum 8” woofer, all in a 5052 marine aluminum enclosure for years of trouble free life. As with all James landscape products, the Omni89AT is available in both 70V and 4 ohms. 70V models use high-quality, low-loss, toroidal transformers which deliver optimal quality, so your system provides James performance whether it’s in 70V mode or 4 ohms. The system can be custom ordered in Bi-amp mode allowing more control of bass performance.
See the Omni48AT model if you are looking for a sat version to work with separate subwoofer.
The units, assembled and tested in Napa, California, are designed to blend seamlessly into your landscape environment.
Frequency Response: 33Hz-20kHz±3dB
Sensitivity: 89dB 2.83V /1m
Recommended Power Range: 50-250 watts/ 70V (50W)
Woofer: (1) 8” (203 mm) Aluminum Subwoofer
Mid: (4) 3” (76 mm) Aluminum Cone Woofer
Tweeter: (4) 0.75” (19 mm) Aluminum Dome Tweeter
Height: 17.4 in (441.96 mm)
Width: 9.75 in (247.65 mm)
Depth: 9.75 in (247.65 mm)
|Number of Speakers||1|
|Midrange Size:||3” x 4|
|Woofer Composition:||Aluminum Cone|
|Sensitivity:||89dB 2.83V /1m|
|Speaker Type:||Outdoor Loudspeaker|