Hot Wired Audio Video

855-PRO-HWAV (855-776-4928)

Crestron® X Series 4 Channel Amplifier

At a Glance

The AMP-X300 provides a professional amplifier solution for commercial applications that saves energy, space, and money. The modular design is easy to configure and ships with everything required to enable surface mounting, rack mounting, and ganging multiple units together.

Proposition 65 Warning for California Residents

The Crestron® AMP-X300 is a high performance, space saving, energy efficient, professional grade amplifier solution that’s totally configurable, yet simple to use. Whether you need a stereo amp that mounts on a wall or under a table, or a multichannel rack mount amp with multiple output types and power levels, the AMP-X300 is simple to specify and install in any configuration.

LoZ (4/8 Ω) and Hi-Z (70 V or 100 V) Output

The AMP-X300 is a 4-channel amplifier (at 75 W per channel) which can also be configured for 2-channel bridged operation (at 150 W per channel), or 1 channel bridged operation (at 300 W), with a choice of “LoZ” outputs to drive 4- or 8-Ohm speakers, or “Hi-Z” outputs to drive a distributed speaker system (70 V or 100 V). Balanced and unbalanced inputs are provided for connection to two stereo or four mono source(s) via detachable terminal blocks or RCA connectors.

ICEpower and Crestron Design

The AMP-X300 was designed in partnership with ICEpower to create a custom, flexible, high performance amplifier topology that is suitable for a variety of audio applications.

Solid & Efficient Performance

The AMP-X300 is engineered to deliver exceptional performance and reliability with low distortion, low noise, and high power headroom. Advanced Class D technology maximizes efficiency to reduce power consumption and heat dissipation. An internal universal power supply ensures consistent performance at varying line voltages.

Convection Cooling

The efficient design ensures cool running operation and long term reliability. The AMP-X300 is high-density stackable with other Crestron modular amps, allowing multiple units to be installed vertically in an equipment rack without needing extra ventilation space.

Modular Design

The AMP-X300 is housed in a half-width rack-mountable form factor that can be installed individually or ganged together in a single rack space. The amplifier ships complete with all the hardware required for installation. Rack and surface mount parts are included, so there are no other mounting accessories or rack shelves to purchase.

Whether mounting in a rack, attaching to a flat surface, or placing on a shelf, it’s easy to combine two amplifiers into a single assembly.

Fully Protected

The AMP-X300 features protection against overheating, shorted or overloaded speaker lines, excessive input signals, and other faults. In the case of a shorted speaker line or overheating condition, both outputs mute automatically until the fault condition is resolved. In the event of a prolonged fault, such as an internal component failure, the outputs mute instantly and the amplifier shuts down.

1 RU high design is surface or rack mountable

Half-rack width form factor, gangable with other next generation half-rack width form factor products

Configurable for either LoZ (4/8 Ω) or Hi-Z (70 V or 100 V) operation

Configurable for 4 x 75 W output, 2 x 150 W output, 1 x 300 W (bridged) output, and 2 x 75 W + 1 x 150 W (bridged) output

Designed in partnership with ICEpower to create a high performance amplifier with the latest technology

Low noise, low distortion, high headroom

Comprehensive fault and speaker protection

Captive speaker connectors for secure and robust connectivity

Balanced and unbalanced inputs

Standby feature instantly turns on amplifier when input sensing circuitry detects an audio signal

Always On feature allows constant on connection with very low power consumption

Front panel power/standby, fault, and signal/clip indicators

Internal universal 100-240 V power supply